Before a county approves your building plans, and long before the first slab is poured, a registered engineer has to prove that your building will stand. That is why structural engineer fees Kenya property owners pay are one of the first professional costs on any project, whether it is a three-bedroom bungalow in Kisumu, a maisonette in Kitengela or a four-storey rental block in Ruiru. Many owners are surprised by the quote, either because it seems high for “a few drawings” or because a cheaper offer looks too good to be true. This guide explains how fees are set, what you are actually paying for and how to judge a quote.
We have already covered how much architects charge in Kenya, so this article focuses on the engineer’s side of the design team. If you would rather have one accountable team handle the calculations, drawings, approvals and site supervision, see the structural engineering solutions by Marble Engineering.
Need structural drawings for your house or apartment? Get a clear, itemised quote: WhatsApp 0789 217 685
How structural engineer fees in Kenya are regulated
Engineering consultancy fees in Kenya are not left entirely to the market. Under section 7 of the Engineers Act, 2011, the Engineers Board of Kenya (EBK) can set fees, and it did so through the Engineers (Scale of Fees for Professional Engineering Services) Rules, 2022, published as Legal Notice No. 20 of 2022. According to a policy review by the Centre for Affordable Housing Finance in Africa, the rules came into force in August 2022 and have three features every owner should understand:
- They set minimum fees, not maximums. A registered engineer may charge more, but not less.
- Fees are largely a percentage of the cost of works. The bigger and more complex the building, the higher the fee.
- Undercutting is professional misconduct. An engineer who charges below the scale risks disciplinary action by EBK.
The detailed percentages sit in the Schedules to the Rules and vary by type of work, so rather than quote a single “rate”, ask any engineer you approach to show how their fee relates to the scale and to your estimated construction cost.
What a structural engineer actually does for your fee
The structural design price covers far more than the sheets you submit to the county. A complete service normally includes:
- Site and soil review: interpreting the soil investigation or advising when one is needed, especially on black cotton soil, reclaimed land or sloping plots.
- Structural analysis and calculations: sizing foundations, columns, beams, slabs, staircases and roof supports for the loads they will carry.
- Structural drawings: foundation layouts, reinforcement details, bar bending schedules and sections that the fundi and site engineer build from.
- Approval support: stamped drawings and calculations for county submission, and responses to any queries from the approving engineer.
- Site inspections: checking excavations, reinforcement before concrete is poured, and key stages of the frame.
- Certification: the structural sign-off the county and lenders often ask for before occupation.
When two quotes look very different, the first question is usually which of these items each one includes.
What drives the structural drawings cost
| Cost driver | Why it matters | Effect on the fee |
|---|---|---|
| Estimated cost of works | The EBK scale is largely a percentage of project cost | Higher project cost, higher fee |
| Number of storeys | More floors mean heavier loads, columns and transfer beams | Multi-storey blocks need far more analysis than a bungalow |
| Soil conditions | Weak or expansive soils need raft, pad or piled foundations | More design work and sometimes extra soil tests |
| Building form | Cantilevers, long spans, basements and roof terraces add complexity | Irregular designs take longer to engineer |
| Scope of site supervision | Number of inspections agreed in the contract | Design-only quotes are lower but leave you exposed on site |
| Revisions | Changes to the architectural layout after design has started | Each redesign adds time and cost |
For larger rental projects, our apartment structural design guide explains how frame systems and storey heights affect both design effort and construction cost.

Percentage fees, lump sums and time charges
Even under a regulated scale, you will meet three common ways of presenting engineering consultancy fees:
- Percentage of construction cost: the approach the EBK rules are built around. It is transparent, but the final fee moves if the construction budget changes.
- Lump sum: a fixed figure agreed upfront for a defined scope. It is easy to budget for, but check that it still respects the minimum scale and clearly lists what is excluded.
- Time charges: billed for specific tasks such as a one-off structural assessment of an existing building, an expert opinion or extra inspections.
Fees are normally paid in stages linked to the work: concept, detailed design, approval and construction supervision. Paying in stages protects you, because you only pay for each stage once it is delivered.
The real cost of cheap structural drawings
It is tempting to buy a set of “ready” structural drawings or use an unregistered draughtsman to save on structural engineer fees. Kenya has seen too many building collapses for this to be a safe shortcut. Cheap drawings usually save money on paper and cost more on site, because:
- They are not designed for your soil, so foundations may be over-designed (wasting steel and concrete) or under-designed (risking cracks and settlement).
- Reinforcement details may be missing, leaving the fundi to guess.
- Unstamped or unregistered work can be rejected at county approval, delaying your project.
- Nobody is accountable if something goes wrong.
A good engineer often pays for part of their fee by optimising steel and concrete quantities. A professional quantity surveyor can then turn those optimised drawings into an accurate Bill of Quantities, so you see the saving in your budget.
How to compare quotes and hire the right engineer
- Check registration. Confirm the engineer is registered with the Engineers Board of Kenya. Only a registered professional engineer can sign off structural designs.
- Ask for an itemised scope. Calculations, drawings, bar bending schedules, approval support, number of site visits and final certification should each be listed.
- Ask how the fee relates to the scale. A quote far below what others charge may be below the legal minimum or may leave out key services.
- Agree on revisions. Know how many design changes are included before extra charges apply.
- Look at past work. Ask for projects of a similar size and type that you can visit.
- Get it in writing. A signed appointment letter protects both you and the engineer.
Can a design-build contract reduce structural engineer fees?
When you appoint separate consultants, you pay each one separately and you carry the job of coordinating them. Under a design-build contract, the architect, structural engineer, MEP engineer and quantity surveyor work in one team with the builder. The professional fees are still there, but coordination is simpler, clashes between architectural and structural drawings are caught early, and there are fewer costly redesigns. For many homeowners and diaspora clients, that coordination is worth as much as the fee itself.
Frequently asked questions
Are structural engineer fees fixed by law in Kenya?
Minimum fees are set by the Engineers (Scale of Fees for Professional Engineering Services) Rules, 2022. Engineers may charge above the minimum depending on complexity and scope, but charging below it counts as undercutting.
Do I need a structural engineer for a single-storey bungalow?
Yes. County approval normally requires structural drawings and calculations, and even a bungalow needs foundations designed for the soil on your plot. The design effort is smaller than for a storey building, so the fee is lower.
Does the fee include site supervision?
Not always. Some quotes cover design and approval only. Ask how many site inspections are included, especially before concrete is poured for the foundation, columns and slabs.
Get a clear quote for your structural design
Marble Engineering and Construction Ltd prepares structural calculations, drawings and approval documents, and supervises key stages on site. Learn more about our structural engineering solutions by Marble Engineering and get an itemised quote for your house or apartment.
Or call 0789 217 685 / 0724 481 087.







