How Much Do Architects Charge in Kenya? Fees Explained

Residential Construction in Nairobi

“How much will the architect cost?” is one of the first questions anyone planning a house or apartment asks, and the answers people hear range from a few thousand shillings for a quick sketch to millions for a large building. Both can be true, because they are paying for very different things. This guide explains how architect fees in Kenya are worked out, what a full fee includes, and how to make sure you get value for what you pay.

If you would like a quote for your own project, see our architectural design and consultation services.

Need house plans or a design quote? Talk to our architect: WhatsApp 0789 217 685

Who regulates architects in Kenya?

Architects and quantity surveyors are registered by the Board of Registration of Architects and Quantity Surveyors (BORAQS) under the Architects and Quantity Surveyors Act (Cap. 525). Only a registered architect may practise as an architect. The By-Laws under the Act set out a scale of professional charges that is mainly a percentage of the value of the project, with the percentage getting smaller as the project gets bigger. Engineers have a separate fee scale, the Engineers (Scale of Fees for Professional Engineering Services) Rules, 2022.

The three ways architects charge

1. Percentage of construction cost

This is the most common method for a full service. In practice, full architectural services for a new building in Kenya are usually quoted at around 6% to 10% of the construction cost, depending on the size, complexity and type of building. A small, complex custom home tends to sit at the higher end, while a large, repetitive apartment block sits lower.

2. Lump sum (fixed fee)

For a clearly defined job, such as drawings for approval of a standard bungalow, many architects agree a fixed fee. This is easier to budget for, but check exactly which stages and drawings the lump sum covers.

3. Hourly or time charges

For advice, inspections, feasibility checks or expert opinions, architects may charge by the hour. Published BORAQS hourly rates are high for senior architects, so time charging is normally used for short consultations rather than full designs.

What a full architect’s fee covers

A percentage fee is not paid all at once. It is spread across the stages of the project, and each stage delivers something you can check:

  1. Brief and sketch design: understanding your needs, the plot and the budget, and producing concept options.
  2. Design development: refining the chosen option into floor plans, elevations and sections.
  3. Approval drawings: preparing and submitting drawings for county approval and responding to comments.
  4. Working drawings and specifications: detailed drawings the contractor builds from, coordinated with the engineer and QS.
  5. Tender and contract: helping select a contractor (in the traditional route).
  6. Site supervision: regular inspections, instructions and certificates during construction until completion.

If you only need some of these stages, for example approval drawings only, the fee should be lower. Ask your architect to show the fee split by stage.

Worked examples

The table below shows what a percentage fee works out to for different project sizes. These are illustrations only: the actual percentage for your project depends on its complexity and the services you need.

Estimated construction costAt 6%At 8%At 10%
KSh 5,000,000 (e.g. a modest bungalow)KSh 300,000KSh 400,000KSh 500,000
KSh 12,000,000 (e.g. a 4-bedroom maisonette)KSh 720,000KSh 960,000KSh 1,200,000
KSh 40,000,000 (e.g. a small apartment block)KSh 2,400,000KSh 3,200,000KSh 4,000,000
Illustrative full-service architect fees. Larger projects usually attract a lower percentage.

Remember that the architect is only one of the consultants. A structural engineer, MEP engineer and quantity surveyor are also needed for most buildings, and county approval fees are separate.

Cheaper options: ready-made plans and design and build

Not every project needs a fully custom design. Two common ways to reduce design costs are:

Architect vs draughtsman: what is the difference?

A draughtsman can produce drawings, often cheaply, but is not a registered architect. Counties generally require approval drawings for buildings to be submitted by registered professionals, and a draughtsman is not accountable to BORAQS for the design. For anything beyond a very simple structure, the money saved can be lost many times over through poor layouts, rejected approvals or costly changes on site.

How to avoid overpaying or underpaying

  • Check registration with BORAQS before you pay anything.
  • Get the scope in writing: which stages, how many design revisions, and how many site visits are included.
  • Ask how the fee is paid: stage payments tied to delivered drawings are fairer than a large deposit.
  • Confirm who appoints the engineer and QS and whether their fees are included.
  • Be wary of very low quotes that leave out approvals, structural drawings or supervision.

For a deeper look at hiring for a home project, read our guide to hiring a residential architect in Kenya.

Frequently asked questions

Is the architect’s fee based on the estimated or final cost?

Early stages are usually charged on the estimated cost, then adjusted to the final contract or construction cost. Agree this in your appointment letter.

Are approval fees included in the architect’s fee?

No. County approval fees and other statutory charges are paid by the owner. The architect prepares and submits the drawings.

Can I pay only for approval drawings?

Yes. Many owners appoint an architect for design and approval only. You will still need structural drawings and should plan for some supervision during construction.

Get a clear design quote

Send us your plot size, location and what you want to build. We will tell you which design services you need and what they will cost, with no surprises. Learn more about our architectural design and consultation.

Or call 0789 217 685 / 0724 481 087.