Phased apartment construction in Kenya is how many landlords build: put up the foundation and ground floor, let the units, then add the next floor when savings, rent or a loan allow. Done well, it gets income flowing early and keeps you out of heavy debt. Done badly, it leaves a block with rusting starter bars on the roof, a structure that cannot safely take more floors, and approvals that no longer match what is on site.
This guide explains how to plan a rental block that is built floor by floor, what must be designed and paid for in the first phase, indicative 2026 costs, and the questions to ask your contractor. It is part of our apartment construction in Kenya guide.
Planning rental apartments in phases? Get a free apartment estimate from our quantity surveyor: WhatsApp 0789 217 685
What phased apartment construction in Kenya really means
Phasing does not mean designing one floor now and “seeing later”. It means designing the whole building today (say ground plus three floors), getting approval for the whole building, and then building it in planned stages. The structure, drainage, water tanks, staircase and electrical supply are all sized for the final building from day one. Only the construction is spread over time.
That difference matters. A ground floor built with foundations and columns sized for a single storey cannot simply carry three more floors later. Strengthening it afterwards is expensive, disruptive to tenants and sometimes impossible. Recent building failures in Kenya have reminded everyone that adding floors without proper structural design is dangerous.
Step 1: Design and approve the full building first
Before any excavation, you need:
- Architectural drawings for the final height, with every floor laid out, including the unit mix. A ready design such as our 3-storey apartment house plans (WKRE016) is a good starting point that can be adapted to your plot.
- Structural drawings and calculations by a registered structural engineer, covering foundations, columns, beams and slabs for the full number of floors.
- A soil investigation, because foundation design for a multi-storey block depends on bearing capacity, especially on black cotton soil common around Kisumu and parts of Nyanza.
- County approval for the full building, plus NEMA and other approvals where your project needs them.
- A Bill of Quantities (BQ) split by phase, so you know exactly what each stage costs before you commit.
Your contractor must also be registered with the National Construction Authority (NCA), the state corporation set up under the NCA Act No. 41 of 2011 to oversee the construction industry, in a category that matches the size of the full building, not just phase one.
Step 2: Decide what goes into phase one
Phase one is always the most expensive per square metre, because it carries work that serves the whole building. A sensible phase one includes:
- Foundations for the final number of floors (never “for now”).
- The ground floor structure, walls and finishes, ready for tenants.
- Column starter bars left at the right length and protected from rust, so the next floor can be joined correctly.
- The staircase core up to the first slab, sized for the full building.
- Septic tank or sewer connection, soak pit or drainage sized for all units.
- Electrical supply and meter room planned for all future units.
- A waterproofed temporary roof or a properly waterproofed slab, so rain does not damage the occupied floor.
Later phases then add one or two floors at a time. Many developers find two-floor phases more efficient than single floors, because scaffolding, formwork and site set-up are paid for less often.
Indicative cost of building an apartment block in phases
Integrum’s published construction rates (updated October 2026) give a standard low-rise apartment block at about KSh 61,610 per m² in Nairobi and KSh 66,510 per m² in Western and Nyanza (Integrum construction costs). These are indicative planning figures, not quotations. Using them for an example block with a 320 m² floor plate (for instance four 2-bedroom units plus a staircase and corridor on each floor):
| Example (320 m² per floor) | Nairobi (KSh 61,610/m²) | Western & Nyanza (KSh 66,510/m²) |
|---|---|---|
| One floor (320 m²), average rate | KSh 19,715,200 | KSh 21,283,200 |
| Ground + 3 floors (1,280 m²) | KSh 78,860,800 | KSh 85,132,800 |
In practice the money is not spread evenly. Phase one costs more than the average floor because it carries the full-height foundations, drainage and services. Upper floors usually cost a little less each, but phasing itself adds cost: re-mobilising the site, scaffolding again, price rises between phases, and protecting starter bars and the roof in the meantime. Ask for a BQ that shows each phase separately so you can plan cash flow and see the real ground-floor figure. Our guide on how to budget for apartment construction in Kenya explains how to build that budget.
Step 3: Fund each phase before it starts
The most common reason a phased block stalls is starting a phase that is only half funded. Practical rules:
- Have at least the cost of the structural work for the phase (columns, beams, slab) in hand before starting. A slab cannot be left half cast.
- Keep a contingency for price changes in cement, steel and labour between phases.
- Use rent from completed floors as a top-up, not as the only source of funds; vacancies and late payments happen.
- Agree payment schedules for apartment projects tied to measurable milestones, not dates.
Before you start, check that the finished building makes financial sense with an apartment feasibility study, and choose your unit mix for rental apartments for the whole block, not floor by floor.
Step 4: Living with tenants while you build upwards
If the ground floor is occupied when phase two starts, plan for:
- Safe, separate access for tenants, with protective hoarding and netting around the scaffolding.
- Working hours and noise agreed in advance, and a notice period in tenancy agreements about ongoing construction.
- Protecting the waterproofed slab when the temporary roof comes off.
- Water and power for the site kept separate from tenants’ meters.
Common mistakes in phased apartment projects
- Designing only the ground floor. Foundations and columns end up too small for later floors.
- Approval for fewer floors than you will build. Adding unapproved floors later risks enforcement and problems with financing, valuation and sale.
- Leaving starter bars exposed for years. Rusted bars weaken the joint with the next floor. Protect them or have the engineer specify how to treat them.
- Undersized drainage and water. A septic tank sized for four units will not serve sixteen.
- Changing contractor every phase without records. Keep the structural drawings, test results and inspection records so the next team builds on facts, not guesses.
- Starting a phase on hope. Half-cast floors and incomplete roofs cost more to fix than they saved.
Questions to ask your contractor about phasing
- Are the structural drawings designed for the final number of floors? Can I see the engineer’s name and registration?
- What exactly is included in phase one, and what is the BQ cost of each phase?
- How will starter bars and the top slab be protected between phases?
- How do you handle price increases between phases?
- What NCA category are you registered in, and can you show apartment projects you have completed?
For a smaller rental project, the affordable rental apartment house plans in our shop can also be designed for phased construction. If you are building a family home rather than rentals, see our sister guide on how to build a house in phases in Kenya.
How Marble Engineering and West Kenya Real Estate help
We design apartment blocks for their final height, prepare structural drawings and a phase-by-phase BQ, handle approvals, and build each phase as a Design & Build contractor from our Kisumu and Nairobi offices. You get a clear plan for every stage, so the block keeps earning while it grows instead of stalling.
Planning rental apartments in phases?
Send us your plot size, location and how many floors you want in the end. Our quantity surveyor will reply with a free indicative estimate for phase one and the full block.
Or call 0789 217 685 / 0724 481 087.