Design Build vs Design Bid Build in Kenya: Which Saves More?

Apartment Plans in Kenya

If you are planning a home, an apartment block or a commercial building, one of the first decisions you make is not about bricks or roofing. It is about how the whole project will be organised. In Kenya, most owners choose between two routes: design build vs design bid build. The first puts design and construction under one contract. The second, often called traditional procurement in Kenya, has you hire consultants to design the building and then tender the finished drawings to contractors. Each route changes who carries the risk, how fast you can start on site and how much control you keep over the final cost.

We explained the basics in our guide What Is Design and Build?. This article goes a step further and compares the two construction project delivery methods side by side, so you can decide which one actually saves you more on your plot. If you already know you want one accountable team, see the design-build services from Marble Engineering, which cover concept, drawings, approvals and construction under a single contract.

Not sure which delivery method suits your project? Get a free design-build consultation: WhatsApp 0789 217 685

How design-bid-build (traditional procurement) works in Kenya

Design-bid-build is the route most Kenyan owners grew up with. You appoint an architect, a structural engineer, an MEP engineer and a quantity surveyor separately. They produce the drawings and a Bill of Quantities (BOQ). The BOQ is then sent out to tender, a building contractor in Kenya is selected (often the lowest compliant bidder), and construction begins.

In private building work, this route is commonly run on the standard Joint Building Council agreement, which law firm CM Advocates describes as popularly used in Kenya as the primary contract for private construction projects. Public projects follow standard tender documents issued under the Public Procurement and Asset Disposal Act, 2015.

  • Stage 1 – Design: brief, concept, detailed drawings and BOQ by your consultants.
  • Stage 2 – Bid: contractors price the BOQ; you compare and award.
  • Stage 3 – Build: the contractor builds what was drawn; consultants supervise on your behalf.

How design-build works

Under design-build, one company takes responsibility for both the design and the construction. The design team and the site team work together from the first sketch, so buildability, material choices and cost are checked while the drawings are still being prepared. You sign one contract, deal with one point of contact and hold one party accountable if something goes wrong.

Because design and construction overlap, site works such as clearing, setting out and foundations can often begin while later details (finishes, joinery, landscaping) are still being finalised. That overlap is where most of the time saving comes from.

Design build vs design bid build: side-by-side comparison

FactorDesign-bid-build (traditional)Design-build
Contracts you manageSeveral (each consultant plus the contractor)One
Who answers for design errorsOften disputed between designer and contractorThe design-build firm
Time to start on siteAfter full design and tenderingEarlier, as design and construction overlap
Price certaintyTender price is known, but variations are commonAgreed early; fewer surprises if the brief is clear
Owner control over design detailHigh, through your own consultantsHigh at briefing stage; needs a clear brief and approvals
Best forOwners with time and in-house expertiseBusy owners, diaspora clients and investors who want one accountable team

Which saves more time?

There is no large Kenyan dataset comparing the two methods, so it helps to look at international research carefully. A 2018 study by the Construction Industry Institute and the Charles Pankow Foundation reviewed 212 building projects in the United States. As summarised by the Design-Build Institute of America, design-build projects had a construction phase about 36% faster than design-bid-build, with lower schedule growth and lower cost growth. Keep in mind that DBIA promotes design-build, and US conditions differ from ours, but the direction of the findings matches what Kenyan owners commonly experience: fewer hand-offs mean fewer delays.

When weighing design build vs design bid build on a Kenyan project, time savings typically come from:

  • No separate tender period after design is complete.
  • Drawings prepared with the builder’s input, so fewer redesigns once work starts.
  • One team preparing county approval submissions, NEMA documents and NCA project registration together.
  • Faster decisions, because one manager coordinates architects, engineers and site crews.

Which saves more money?

The lowest tender in a traditional process can look cheaper on paper. The real question is what you pay at the end. In design-bid-build, the contractor prices only what is drawn. Any gap, clash or omission in the drawings becomes a variation, and variations are where budgets grow. Under design-build, the same firm that draws the building also prices and builds it, so it has a strong reason to get the drawings right the first time.

Cost drivers to compare in any design build vs design bid build decision:

  • Consultant fees: paid separately in traditional procurement; usually bundled in design-build. See our breakdown of how much architects charge in Kenya.
  • Variations and claims: typically higher where design and construction are split.
  • Time-related costs: rent you keep paying, loan interest, or rental income you lose while the project drags.
  • Value engineering: easier in design-build, because the builder can suggest cheaper equivalent materials before drawings are final.
  • Dispute costs: fewer parties usually means fewer disputes.
Design build vs design bid build in Kenya - building contractor on a residential construction site

When traditional procurement is still the right choice

In the design build vs design bid build debate, design-build is not automatically better for every project. Traditional procurement can still make sense when:

  • You already have complete, approved drawings and a BOQ from consultants you trust.
  • You are a public body bound by specific procurement rules.
  • You want several contractors to compete on exactly the same design.
  • You have the time and experience to coordinate separate consultants and a contractor yourself.

Even then, a professional quantity surveyor and strict contract administration are essential to keep variations under control.

How to choose the right building contractor in Kenya for either route

  • Confirm the contractor’s registration with the National Construction Authority in the right category for your project value.
  • Check that architects are registered with BORAQS and engineers with the Engineers Board of Kenya.
  • Ask for completed projects you can visit, not just photos.
  • Insist on a written contract, a clear payment schedule tied to milestones and a defects liability period.
  • For design-build, ask exactly what is included: drawings, approvals, structural design, MEP, BOQ, supervision and handover.

If you plan to build an investment property in stages, our guide to phased apartment construction in Kenya shows how a single design-build team can keep each phase on track. For another perspective on the same comparison, our sister site has a detailed look at design and build vs traditional construction in Kenya.

Frequently asked questions

Is design-build more expensive than design-bid-build?

Not necessarily. The headline price may look similar or slightly higher, but design-build usually reduces variations, delays and disputes, which are the costs that push traditional projects over budget. Compare the final expected cost, not just the starting quote.

Do I lose control of the design under design-build?

No. You approve the brief, the concept and the detailed drawings before construction. The key is to give a clear brief early and to agree in writing which decisions need your sign-off.

Which method is better for diaspora clients?

Most diaspora clients prefer design-build because they deal with one accountable company, receive one set of progress reports and avoid coordinating several consultants from abroad.

Talk to one team about design and construction

Marble Engineering and Construction Ltd handles concept design, drawings, approvals and construction under one contract. Learn more about our design-build services from Marble Engineering and get a clear plan and budget for your project.

Or call 0789 217 685 / 0724 481 087.